MAGNETIC VENT COVERS

Dundas Jafine’s Magnetic Vent Covers work with metal floor and ceiling air registers to help close off registers in unused spaces and improve air distribution room by room.

Choose the Right Magnetic Vent Cover Size

The 4” x 10” Magnetic Vent Covers are printed with register markings to replicate the appearance of an air register. The plain white 8” x 15” covers can be cut to size to accommodate a variety of register dimensions.

Where to Use Magnetic Vent Covers

Use magnetic vent covers to close off metal registers in rooms that are not being used, such as a guest room, storage area or seasonal space. They are also a practical option when adjusting air distribution between rooms. For best results, use only on compatible metal registers.

Installation Tips

• Confirm that the register surface is metal and clean before applying the cover.
• Choose the cover size that matches the register, or trim the 8” x 15” plain white cover carefully to fit.
• Position the cover flat against the register so the magnetic surface makes full contact.
• Check the cover periodically and adjust it as needed when changing seasonal room use.

Frequently Asked Questions

Can magnetic vent covers be used on floor and ceiling registers?

Yes. Dundas Jafine Magnetic Vent Covers are designed for compatible metal floor and ceiling air register vents.

Which magnetic vent cover sizes are available?

The 4” x 10” cover is available in white and bronze. The 8” x 15” cover is plain white and can be cut to size.

Can I use a magnetic vent cover in an unused room?

Yes. Closing off compatible registers in unused spaces can help direct air distribution to the rooms being used.