Learn how to paint a Dundas Jafine plastic vent hood or cap with our step-by-step guide. From preparation to finishing touches, we cover everything you need to know to give your vent hood a fresh new look.
Materials needed:
• Plastic vent hood made by Dundas Jafine
• Sandpaper (medium-grit and fine-grit)
• Primer specifically designed for plastics (e.g., Krylon Fusion or Rust-Oleum Plastic Primer) in a spray can
• Spray paint specifically designed for plastics (e.g., Krylon Fusion or Rust-Oleum Plastic Paint) in a spray can
• Drop cloths or old sheets for protection
• Masking tape (optional)
• A well-ventilated workspace
Step-by-Step Instructions:
Sanding:
• Medium-grit sanding: Use a medium-grit sandpaper (about 120-150 grit) to sand the entire vent hood, including the surface and edges. This will help create a rough surface for painting.
• Fine-grit sanding: Switch to a fine-grit sandpaper (about 220-240 grit) and sand the vent hood again, making sure to remove any remaining dust or debris.
Priming:
• Shake the primer can: Shake the primer can well before use.
• Apply primer: Hold the primer can 8-10 inches away from the vent hood and spray a light, even coat of primer. Move the can in a steady, back-and-forth motion to cover the entire surface.
• Allow primer to dry: Let the primer dry completely, usually between 30 minutes to an hour.
Painting:
• Shake the paint can: Shake the paint can well before use.
• Apply paint: Hold the paint can 8-10 inches away from the vent hood and spray a light, even coat of paint. Move the can steadily, back-and-forth to cover the entire surface. Apply multiple thin coats, allowing each coat to dry, before applying the next.
• Allow paint to dry: Let the final coat of paint dry completely, usually between 30 minutes to an hour.
Additional Tips:
• Masking: If you need to paint around the vent hood’s edges or details, use masking tape to protect those areas. Apply the tape carefully to ensure it is pressed firmly onto the surface.
• Vent hood components: If your vent hood has removable components, such as a filter or grille, remove them before painting and set them aside for reinstallation later.
• Reinstallation: Once the paint is completely dry, reinstall the vent hood according to the manufacturer’s instructions.